August 2020
|
Solar Stik
®
, Inc.
34
|
24VDC PRO-Verter 7000-120 AGS Operator Manual
SETUP
The SETUP menu contains the prime programming for PRO-Verter operation. Nearly every function
the PRO-Verter manages can be accessed and controlled from within the SETUP menus. The
menus are configured at the factory in accordance with application information provided by the
customer, and the programming is usually protected from unauthorized access by a passcode.
This menu should only be accessed when primary PRO-Verter functions require fine-tuning based
on application demands. Contact Tech Support or your FSR if changes need to be made on a
protected menu.
TECH
The TECH menus allow for observation of key metrics including software revisions, temperatures,
fault and data tracking, and reset protocols.
Rotary SELECT Knob
Turn the knob clockwise and counterclockwise to view the different menu items and available PRO-
Verter settings. Push the SELECT knob to enter a menu item or to save a setting once it is displayed
on the LCD screen.
The LCD screen can be refreshed by holding down the SELECT knob for 10 seconds.
03 Gen Control
OFF
CTRL
Press
Top line shows current
FAVS menu and position in FAVS menu
Bottom line shows current setting
Push Select to edit current setting
Press to save
01 AC In Control
Auto Connect
02 CHG Control
Multi-Stage
Set Gen Control
OFF
Set Gen Control
ON
03 Gen Control
Select
Set Gen Control
AUTO
Rotate to
desired
selection:
To change or check a setting, first press a menu button, then use the SELECT knob to navigate to
the desired menu item. The diagram below illustrates how to use the menu buttons and the SELECT
knob to move between and within various menus. The diagram below illustrates how to change the
generator control. The options OFF, ON, and AUTO are in CTRL (03 Gen Control)...
Example: How to Navigate the User Interface Menus
Press knob
to select
Figure 14. How to start/stop a generator manually
