Bunsen Air - Installer Manual
4 |
P a g e
2
Introduction
The Bunsen Air is Solar Assisted Heat Pump designed to transfer energy from the free natural elements into hot
water for domestic properties. The unit will retro-fit to existing cylinders, or newly introduced cylinders, and turn that
cylinder into a heat store for renewable water heating.
The system is designed to heat the hot water with the standard cylinder of 200 Lites up to 53°C at all time, and up to
60°C once a week for anti-legionella. The unit is set to a default (can be adjusted) temperature of 53°C, when the
temperature of the cylinder drops by 5°C the system will automatically switch on to raise the temperature back to the
required set temperature.
In addition there is an Energy Saving mode which will allow 3 time periods to be set up with 3 different target
temperatures for use with a time zone setting or under automatic mode.
The Bunsen Air has all the benefits of standard heat pump technology, based on low level power usage running for
longer periods to generate low energy renewable heating of hot water.
Bunsen Air Components
Key Components
1. Bunsen Panels
2. Bunsen Controller
3. Refrigeration Pipe
4. Standard Fitting
5. Water Fitting
6. Triangular Mounting Brackets