Bunsen Air - Installer Manual
23 |
P a g e
13
Inspection and Maintenance
The Bunsen Air should be cleaned with water only and if
necessary non-abrasive detergent.
Note: When cleaning, please make sure that the main
electrical supply is turned off and do not clean the panel
if in the direct sunlight.
The system should be drained off if the Bunsen Air is out
of usage for a prolonged time period and the electrical
supply to the Bunsen Air should be isolated.
14
Relocation after first Installation
Sometimes the user may want to relocate their Bunsen Air after first installation. It is important to keep all refrigerant
inside the system before relocation. Here below are the steps,
Clockwise
rotation
Clockwise
rotation
Steps:
1. Keep the Bunsen unit on.
2. Connect the pressure gage with the valve quickly.
3. Turn the valve clockwise to the end (stop the gas out
from Bunsen unit)
4. Immediately close the service valve and then Switch
off the system after the value of the pressure gage is 0
or below
5. Remove the pipe-work and the gage. Now relocate for
installation.