23
Installation and Service Check List
Boiler Model: _______________________ Serial No.: ____________________
Installation Date: ______________________
Installer Name: ________________________
Phone No.: ____________________
Boiler Installation
□
Boiler level and in solid contact with floor?
□
Boiler and burner wired per wiring diagram and National Electric Code? 120VAC wiring
Type_____ Size _____ AWG
□
Burner sealed to boiler? Mounting nuts tight?
□
Space is large enough to provide required clearances?
□
Local, state and national codes, laws, regulations and ordinances followed?
Vent System
□
Existing chimney and vent system inspected to NFPA Code and in good condition?
□
New vent pipe installed and properly sealed?
□
Vent size checked against furnace manual and codes?
□
Gas boilers – Double Swing Damper installed along with spill switch
.
Oil Burner Operation
□
Burner Model: __________________ Nozzle: _______GPH _______Deg. ____Type_______
□
Burner Pump Pressure: ______________
□
Fuel filter and fuel lines installed and inspected as per burner manual?
□
Air bled from oil piping? Piping checked for leaks?
□
Burner started, adjusted and tested per burner manual?
Gas Burner Operation
□
Burner Model: ___________________ Orifice:__________ Manifold Pressure:_________
□
Fuel lines installed and inspected as per the burner manual?
□
Piping checked for leaks?
□
Burner started, adjusted and tested as per the burner manual?
Boiler Operation
□
Limit control tested for proper operation?
□
Boiler observed going through several operational cycles for proper operation?
Post Installation
□
Reviewed owners’ information in this manual with owner or maintenance personnel and
instructed
to
keep
for future reference?
□
Properly filled in and returned warranty registration card to Boyertown Furnace Co. Inserted
burner manual instructions with furnace manual for future use?