8
EN
4. Safety Instructions
4.1 AREA OF RESPONSIBILITY
4.1.1 Manufacturer
SOLA is responsible for delivering a safe and immaculate product,
including the operating manual and original accessory equipment.
SOLA-Messwerkzeuge GmbH
Unteres Tobel 25
A-6840 Götzis
4.1.2 Operator
The operator is responsible for the correct use of the product, the deployment of its employees, training
for its employees and the operational safety of the product.
The operator understands the safety information which is stated on the product and the instructions in
the operating manual.
The operator shall comply with the standard local regulations relating to safety and accident
prevention regulations as well as worker protection laws and regulations.
The operator shall immediately notify SOLA if safety-related issues should arise relating to the product
or during its utilization.
The operator shall ensure that the product is not utilized any further if defects become evident, and
they will have the product repaired professionally.
4.2 Improper Use
Use of the device and the accessories without instruction.
Use of third-party accessories or additional equipment.
Use outside of the intended limits (see Chapter 3 / Technical data).
Use under extreme temperature fluctuations without an adequate acclimatization.
Disabling of safety devices and removal of hazard notices and labels.
Unauthorized opening of the device.
Performance of modifications or alterations to the device or the accessories.
Deliberate blinding of third parties.
Inadequate safeguarding at the installation site.
4.3 Utilization limitations
The RED DIGITAL, REDM DIGITAL, RED LASER DIGITAL is suitable for use in an atmosphere which can be
permanently inhabited by humans.
KESON LLC
810 N. Commerce St. Aurora
Illinois 60504
