manualshive.com logo in svg

Sola RED DIGITAL, Operating Instructions Manual

Share
Download
Sola RED DIGITAL Operating Instructions Manual Download Page 3

3

EN

Operating instructions  

RED DIGITAL, REDM DIGITAL, RED LASER DIGITAL 

(original version)

About this manual

Congratulations on the purchase of your new RED DIGITAL, REDM DIGITAL, RED LASER DIGITAL!  
You have acquired a SOLA measurement instrument, which can make your work easier, faster 
and more precise.
To utilize the complete functionality range of this measurement instrument, and to ensure a safe  
operation, please observe the following instructions:
•  Please read this operating manual before commissioning the device.
•  Always keep the operating manual near the device.
•  Only hand over the device to other persons together with the operating manual.
•  Never render the attached warning signs unreadable.

Content

 

  1.  General information
 2.  Description
  3.  Technical data
  4.  Safety instructions
  5.  Laser  safety / classification
  6.  Getting started
 7.  Operation
  8.  Calibration and adjustment
  9.  Maintenance, storage and transportation
10.  Delivery contents and accessories
11. Troubleshooting
12. Disposal
13.  Manufacturers’s guarantee
14.  EC conformity declaration

Summary of Contents for RED DIGITAL


























Reviews:

No comments

Brands by name

Popular brands

Load more brands