51
The
SYNERGY 4
lines consist of a beige Technora Core of high resistance to
tension and has low distortion rate, covered by a layer of colored polyester.
The set is made of individual lines, with sewn ties on both extremities.
SUSPENSION SYSTEM
The main bottom lines and the braking master lines are 1,0 mm, 1,1 mm,
1,2 mm, 1,5 mm, and 2,1 mm in diameter respectively. The upper line is
0,90 mm in diameter.
The upper lines distinguish themselves (next to the inside layer) and the
main lines, which are connected to the Quick Links. These, in turn connect
to the main lines on the risers. The stabilizers' lines are connected to the
same Quick Links.
The brake lines come out of the trailing edge, through the master line and
are linked to the toggles, passing through a pulley attached to the 'D' riser.
Lines 'A' and the brake lines are of different color in order to facilitate
takeoff preparation. The Quick Links are triangular shaped and are made
of inox stainless steel.
On the brakes' master lines, there is a mark at the ideal setting point, at
which height the toggles are affixed. This setting should not be altered as
it ensures adequate and sufficient path and room for the toggles in case of
emergency situations during flight and landing. Further more, in this
position the paraglider is not constantly on a stall.
Warning:
In the event of one or more brake lines get stuck during flight, or if a
toggle is lost due to a line brake, the canopy can still be flown by
applying gentle pulling of the D risers, therefore controlling directional
changes.
SPEED SYSTEM
The Speed System works on the risers 'A', 'A1', 'B' e 'C'. When set at the
normal position, all risers have the same length: 52,5cm.
The
SYNERGY 4
allows for a Foot Speed System installation. It has 5
risers on each side, with the 'A' lines attached to the 'A' riser. The riser 'A1'
is turned to the tabs. The 'B' lines and the stabilizer are attached to the 'B'
riser. Lines 'C' are attached to riser 'C' and lines 'D' are attached to riser 'D',
additionally to the brake pulley support.
When the Speed System is activated, it shortens the risers 'A' 14 cm,riser
`A1´ 13cm, riser 'B' by 12cm and riser 'C' by 6cm. The riser 'D' remains
in its original position.
50
Lines
Risers
Fitanew 19 mm 1600 kgf
Quick Links
Royalmax 12 / Ansung 22 mm
Pulleys
Charly / Austrialpin / Ansung
All components are of the highest grade and were selected with the
long-term durability of your equipment in mind.
Reinforcements
Mylar laminated reinforcement. Selected to improve long term durability.
Its function is to maintain the main shape and attitude of attack, without
sacrificing your paraglider's characteristics during takeoff and flight.
Mylar/Carbon Diax 60P/120P
-0
-1,1 mm Cousin Vectran® com capa – BL 85 kg
-1,0 mm Cousin Vectran® ULTIMATE – BL 150 kg
-1,2 mm Cousin Vectran® ULTIMATE – BL 180 kg
-1,5 mm Cousin Vectran® com capa – BL 150 kg
-2,1 mm Cousin Vectran® com capa – BL 237 kg
,9 mm Cousin Vectran® sem capa – BL 95 kg
