SOL paragliders Flexus LOTUSOne, Manual

Page: 9 / 41

9
F
F
l
l
e
e
x
x
u
u
s
s - Materials
Top / Bottom
Wtx40 PU+Silicon Coating 40 gr/m
2
Profiles and Internal Diagonal Reinforcements
Pro-Nyl High Tenacity
Nylon Rip-Stop Hard finish 42gr/m
2
Reinforcements
2.5 mm Nylontabs
Lines
The lines are made of technora and polyester. They are known for its high grade of
resistance and low stretching overtime. The bottom lines have a diameter of: 2.5 / 2.1
/ 1.5 / 1.0 mm. The upper lines have a diameter of: 2.1 / 1.5 / 1.0 mm.
Risers
Premium 19 x 2,0 mm Flat Multi 1600kg
Quick Links
Ansung Precision 22 mm Bl 800 kg
Pulleys
Sol PL14
All components are made of high quality materials and were selected for a long life
purpose.
Materials and limits of use
Avoid storing the power glider for long periods in areas with high humidity, heat or
extreme cold, this causes premature aging of the materials and could influence the
flight characteristics of your glider.
The LTF Norm quotes:
* Temperatures from -30
o
C to +70
o
C during the storage should not interfere with the
security during the use of the equipment.
* Temperatures from -30
o
C to +50
o
C and oscillation of the relative air humidity
between 25% and 100% during use should not interfere with the security.
Remember, you have acquired a high quality product which has been produced with
carefully chosen materials. Think carefully about the storage and handling of your
power glider.
The permission of use expires with -30° C.