70
GSR2600
Chapter 6
LCD Display
6.6.2
Sleep
This menu displays the current state of the sleep mode.
While on the Sleep screen, press <Ent> to enable editing of the
sleep mode settings. Use the up and down arrow keys to switch
between ENABLED and DISABLED. By default, the sleep
mode is DISABLED.
Note:
If you set the sleep mode to ENABLED, that setting
will not be saved when the receiver is shut down. The
receiver’s sleep mode will default to DISABLED every
time the receiver is turned on using the power button. This
is exactly the opposite behaviour to the 6100 IS, which
defaults to ENABLED when turned on. If you use both
receivers, it is important to keep this difference in mind.
When sleep mode is ENABLED, the receiver will turn off
during times of inactivity to conserve power. An automatic
scheduler (if enabled) will turn the receiver back on for
scheduled sessions, and the receiver will shut itself down after
running the scheduled session. The sleep mode will remain
enabled until you manually turn off the receiver by pressing its
power button.
For more information on the sleep mode and the automatic
scheduler, see Chapter 4, Basic Operations.
6.6.3
RTKReset
This menu enables you to reset the RTK filter, forcing the
system to restart the ambiguity resolution calculations.
750-1-0093 Rev 1.book Page 70 Friday, June 28, 2002 4:02 PM
