General Components
Chapter 3
GSR2600
13
You can swap data cards while the GSR2600 is on, providing
that data logging is not in progress. If the card is accidently
removed while data is logging, (or if you experience a power
interruption or similar disruptive event), the GSR2600 may lose
several seconds, up to a maximum of one minute, of data.
When possible, error messages are generated to identify
problems as they arise.
The GSR2600 is supplied with a CompactFlash data card, but
you have the flexibility of choosing the data card with the
storage capacity that is the most appropriate for your needs,
based on the selected data collection rate. The GSR2600 has
been tested with SanDisk ATA-Type CompactFlash 8 MB, 20
MB, 40 MB, and 80 MB data cards.
Note:
If you choose to use a data card that has not been
tested with the GSR2600, Sokkia cannot guarantee
performance with the untested card.
3.3.1.1
Inserting and removing the data card
When the access door is open, you have unobstructed access to
the data card compartment.
To insert the data card, follow these steps:
1.
Open the access door.
2.
Ensure that the logo side of the card is face-up, and the card
is correctly aligned.
3.
Slide the card into the slot.
4.
Push the card in until it locks in place (the eject button,
located to the right side of the data card compartment, will
extend).
750-1-0093 Rev 1.book Page 13 Friday, June 28, 2002 4:02 PM
