Sokkia GSR2600 Operation Manual Download Page 69

Page: 69 / 118

LCD Display

Chapter 6

GSR2600

Press <Ent>.

You will be prompted to confirm that you want to stop the
configuration. Press <Ent> to confirm, or <Esc> to cancel.

6.4.3

Sched

This menu displays the current state of the scheduler.

When the scheduler is disabled, the GSR2600 will not run
schedules. To set the GSR2600 so that it will run schedules,
follow these steps:

Press <Ent>.

Use the up and down arrow keys to set the scheduler to
ENABLED

Press <Ent>.

You will be prompted to confirm that you are sure you
want to enable the scheduler. If you are, press <Ent>. If no,
press <Esc>.

The LCD will now display SCHEDULER:ENABLED.
Follow these same steps to disable the scheduler.

750-1-0093 Rev 1.book Page 61 Friday, June 28, 2002 4:02 PM

Summary of Contents for GSR2600























































































































Search results

Summary of Contents for GSR2600

Reviews:

Related manuals for GSR2600

Brands by name

Popular brands

Sokkia GSR2600, Operation Manual

Search results

Summary of Contents for GSR2600

Reviews:

Related manuals for GSR2600

Brands by name

Popular brands