36
GSR2600
Chapter 5
Display Panel Operations
The following table explains the message delivered by the
receiver for single and continuous beep patterns:
5.3
Escape Button
Press the <Esc> button to go backwards through menu items in
the LCD. With continued pressing, you will eventually return
back to the top of the menu where you started. For more
information, see Section 6.1.1, Navigating the menus, Page 42.
# of beeps
Duration
Condition
1
single
Receiver on and ready for operation, initiated
whenever you initially press the power button
to turn the receiver on
2
single
Receiver is turning off, initiated by pressing
power button
2
single
Data card erase, initiated by power button
pressed
2
single
Factory reset, initiated by power button
pressed
2
single
Acceptable data quality
3
single
Insufficient data quality
3
continuous
Remaining battery life is below 15 minutes
3
continuous
Memory card more than 80% full
4
continuous
Memory card error
4
continuous
Power button stuck
750-1-0093 Rev 1.book Page 36 Friday, June 28, 2002 4:02 PM
