![SOGEDIS HP T2 Service Manual Download Page 7](http://html1.mh-extra.com/html/sogedis/hp-t2/hp-t2_service-manual_1312542007.webp)
HP T2 PANEL
SERVICE MANUAL
***The machine has humidity sensor that detects whether the laundry dry or not. At the
programs that work with humidity sensor laundry does not dry in fixed time. Duration is
constantly updates according to humidity data taking from laundry.
***Time Drying Program: Humidity sensor is deactivated. The program ends when the time is up,
without checking the humidity of the laundry.
***Express 45’/ Shirts 30 ‘: Humidity sensor is activated. The program time may extend, if the
customer use different laundry according to the load in the program description.
Express 45' : 1 kg of cotton shirts spun at high speed in the washing machine are dried in 45 minutes
Shirts 30' : 2 to 3 shirts are ready for to be ironed in 30 minutes.
***Delicate: This programme dries synthetics, such as shirts, t-shirts, blouses, at a lower
temperature compared to the cottons programme.
*** Refresh: Time drying option is selected from 10 minutes to 150 minutes without providing hot
air, refresh is done and bad odors can be eliminated.
4.3. Children’s Safety
There is a child lock option to avoid changes in the program
flow when keys are pressed during the program. To activate child lock,
press and hold “sw2” and “sw3” keys simultaneously for 3 seconds.
When the child lock is active, all keys will be deactivated. Child lock will
be deactivated automatically at the end of the program. When the
child lock is being activated/deactivated, “CL” will flash on the display
for 2 seconds and an audio warning will be heard.
Warning: when the product is running or the child lock is active, if you turn the program selection knob,
you will hear an audible warning. Even if you set the program knob to another program, the previous
program will continue running. To select a new program, you need to deactivate the child lock and
then set the program selection knob to “Cancel” position. Then, you can select and start the desired
program.
Summary of Contents for HP T2
