SOGEDIS HP T2, Service Manual

Page: 11 / 69

HP T2 PANEL
SERVICE MANUAL
Step 8
(Knob Position
8)
Compressor OFF- Motor CCW (Tumble CW)
OFF- Cooling fan ON
10 sec - -
Service must check power of
at the home voltage and fan
will be controlled manually by
technical service.
Step 9
(Knob Position
9)
Compressor ON- Motor CCW (Tumble CW) -
motor off
10 sec - -
Service must check power of
at the home voltage.
Step 9
(Knob Position
9)
Check conductivity sensor when door is
opened and motor is off
5 sec E01 -
Service puts his hand on the
humidity sensor plates and
software checks sensor data
*If sensor data=0, humidity
sensor connector is taken out
Remove the
last error (Knob
Position 1)
5 sec DEL
DL is visualized on
display and make
fast blink for 2 sec
for T0.DEL is
visualized on
display and make
fast blink for 2 sec
When the knop positioned to
program 1, service will pust
the both SW4 and SW5 for
T0/T1 (child lock mode).
When the knop positioned to
program 1, service will pust
the both SW2 and SW3 for T2
(child lock mode).