19 • Control Keypad
________________________________________________________________________________________________
INSULATION PARA.
***SETTINGS***
Display and default
values
Range Description
the MIP-6 is not running
.
While MIP-6 is running each parameter can be changed
individually by pressing
Store
key after modifying the
parameter.
When parameters are correctly stored, the LCD will read:
DATA SAVED OK
This concludes INSULATION PARAMETER settings.
Pressing Select key after DATA SAVED OK returns to the
first display in this mode.
Note:
In case of a failure in parameter storing, the LCD
displays:
STORAGE ERROR
In this case load MIP-6 default parameters. Refer to section
6.5.3 on page 13 for more details on loading MIP-6 default
parameters.