SoftBank P00000401A01, Quick Manual

Page: 9 / 24

8
Check that the supplied voltage is appropriate for the battery charger.
Do not use any power source or voltage other than that specified (AC 100 to 240 V, 50 to
60Hz).
Failure to use the proper power source or voltage may cause fire, injury, electric shock,
damage, malfunction, overheating, leakage, chemical explosion, or other damage to the
machine, battery charger, battery or notification pager.
Make sure that dirt or other foreign matter do not adhere to the battery charger.
Do not use in a dusty place. If the plug is dusty, unplug it from the outlet and wipe with a dry
cloth.
Otherwise, it may cause fire, injury, electric shock, damage, malfunction, overheating,
leakage, chemical explosion, or other damage to the machine, battery charger, battery or
notification pager.
Do not use the battery charger or power cable if damaged.
Doing so may cause fire, injury, electric shock, damage, malfunction, overheating, leakage,
chemical explosion, or other damage to the machine, battery charger, battery or notification
pager.
The battery charger is designed specifically for the machine. Use only the supplied
designated power cable.
Failure to use the supplied designated power cable may cause fire, injury, electric shock,
damage, malfunction, overheating, leakage, chemical explosion, or other damage to the
machine, battery charger, battery or notification pager. Do not use the power cable with any
another product.
Always unplug the battery charger from the outlet if not using it for a long time or when
carrying out maintenance on it.
Failure to do so may cause fire, injury, electric shock, damage, malfunction, overheating,
leakage, chemical explosion, or other damage to the machine, battery charger, battery or
notification pager.
If the battery charger is not operating normally, takes a longer time to recharge than
normal, or if it produces sparks, smoke, odor, etc., immediately unplug it form the
outlet, and contact customer support.
Failure to do so may cause fire, injury, electric shock, damage, malfunction, overheating,
leakage, chemical explosion, or other damage to the machine, battery charger, battery or
notification pager.
Do not step on the power cable or otherwise subject it to excessive force when it is
connected to the battery charger.
May break the terminals on the power cable and cause malfunction or fire.
Use the battery charger distanced at least 10 cm (4 inches) from a wall so as not to
block its air vents.
Blocked air vents will cause the temperature in the battery charger to rise, and may cause
fire or malfunction.
If thunder is audible, unplug the battery charger from the outlet.
Failure to do so may damage the battery charger.
The battery charger may get hot so take caution on handling during or right after
charging.
Failure to do so may result in burns or other injuries.
Do not use in a location where vibration or impact is applied.