If the problem does not resolve after the reboot, please contact the customer service that your local
distributor specifies.
In case of any unknown trouble or if the Machine does not operate properly, reboot the Machine.
16
1. Turn the Main Power Switch off
2. Check that the Secondary Battery Power Button is off
3. Remove the Battery from the Machine
4. Wait for 30 seconds
5. Insert the Battery into the Machine
6. Turn the Main Power Switch on
1.Open the dustbin
2.Remove the dustbag
3.Hook it to the dustbin pin
4.Push it in firmly
5.Check the dustbin pin is afloat
Hold the dustbin access
handle down and remove
the dustbin cover toward
you.
Pull out the attachment sheet
and remove the used dustbag
from the Machine.
Ensure that the illustration
side of the dustbag is facing
upwards and attach it to the
machine.
Align the suction port and
the attachment sheet with
the opening and push in
the attachment sheet onto
the right side.
If the dustbag is installed
correctly, the dustbin pin will
float. Check that it is afloat and
close the dustbin cover.
Dustbag
If the error message is displayed when the dustbag is full, replace it with a new dustbag.
The recommended replacement period is approximately every 9 hours (3 hours a day, 3 days a week).
Replace every 9 hours approx
Sensor
If the sensors are dirty,
gently wipe the surface
with the Micro-fiber cloth.
Secondary Battery
Power Button
Check that the Secondary
Battery Power Button is off.
Hopper Tray
Discard any dirt in the hopper tray.
Brush
Remove any dirt or hair
caught in it as necessary.
Brush
If the bristle of the Brush
is getting shorter, replace
it with a new one.
HEPA Filter
If the HEPA filter is dirty,
replace it with a new filter.
Do not wash with water.
2D/3D Camera
(Sensor)
LIDAR Sensor
Cliff Sensor
* It is possible to wash the Tray with
water. Make sure the Tray is
completely dry before putting it back
to the Machine.
8 Machine Maintenance
【
Every day ~ every week
】
7 Machine Maintenance
【
Once in half a year
】
9 Troubleshooting
Summary of Contents for P00000401A01
Page 24: ......
