ColorView III • Software Camera Control
44
Clipping border (pixel)
When clipping is used, the edges of the images are clipped. Hence, clipping
does not have any effects on the resolution and brightness as well as the
required exposure time.
Left, Right, Top, Bot-
tom
The fields entitled
Left
,
Right
,
Top
and
Bottom
show the amount of pixels
that are to be clipped from each image edge. Each individual value can
reach from 0 (no clipping) to almost the entire image in each respective di-
rection (complete clipping). If a value for the clipping already has been set,
the setting possibilities for clipping the opposite edge reduce themselves re-
spectively.
Interactive
Click the
Interactive
button to be able to place the clipping interactively into
the image document. Move the pointer with the mouse button depressed to
change the size of the area to be acquired. The actual acquired area is
marked by a red frame. Move the mouse to alter the position of the marked
area within the image document. Rightclick once to fix the area to be ac-
quired.
No Clipping
Click the
No Clipping
button to return the values for
Left
,
Right
,
Top
and
Bot-
tom
back to 0, thus disabling Clipping.