ME 3000SP
User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 32 -
10) *Empty Discharged(V)(only for DEFAULT battery type)
Select“10.Empty Discharged(V)”and press“OK”.Press“up”or“down”to change the
1st digit,press“OK”to switch to next digit.Input the value of Empty Discharged
Voltage per battery specification.Press“OK”.
11) *Full Charged(V)(only for DEFAULT battery type)
Select“11.Full Charged(V)”and press“OK”.Press“up”or“down”to change the 1st
digit,press“OK”to switch to next digit.Input the value of Full Charged Voltage per
battery specification.Press“OK”.
12) Save
Select“12.Save”and press“OK”to save all battery parameters.
2. Clear Energy Data
Select“2.Clear Energy”and press“OK”,“input password”is shown.Input the
password“0001”,press“Up”or“Down”to change the 1st digit,press“OK”to switch to
next digit,when“0001”is shown on the screen,press“OK”.If“Incorrect,Try Again!”is
shown on the screen,press“Back”and input the password again.
3. Clear Events
Select
“
3.Clear Events
”
,press
“
OK
”
button twice to clear all the events.
4. Set Country(refer toSet country)
Select“4.Set Country”,press“OK”,current country setting is shown,input new
country code&press“OK”
If“Set Disable”is shown,you need to go to“6.Function to Set Country”to enable
country setting first.
5. Set Communication
Select“5.Set Communication”,press“OK”to enter autotest interface.
5.Set Communication
Press“OK”
“Up”↑
“Down”↓
1.Communication Addr.
2.Baudrate
3.Databits
4.Parity
5.Stopbits
(1) Communication Addr.
Select“1.Communication
Addr.”,then
press“OK”to
Set
Communication
Addr.,press“Up”or“Down”to change the 1st digit,press“OK”to switch to next
digit,and press“OK”.
(2) Baudrate
