SOFAR 7K~10.5KTLM-G3
User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
- 19 -
Figure 3-4 Moving the inverter (2)
Step 2
Lift the SOFAR 7K~10.5KTLM-G3 from the packing case and move it
to the installation position.
To prevent device damage and personal injury, keep balance when
moving the inverter because the inverter is heavy.
Do not put the inverter with its wiring terminals contacting the floor
because the power ports and signal ports are not designed to support the
weight of the inverter. Place the inverter horizontally.
When placing the inverter on the floor, put foam or paper under the
inverter to protect its shell.
Attention
3.6. Installing SOFAR 7K~10.5KTLM-G3
Step 1
Determine the positions for drilling holes, ensure the hole positions are
level, then mark the hole positions using a marker pen, use the hammer drill to
drill holes on the wall. Keep the hammer drill perpendicular to the wall, do not
shake when drilling, so as not to damage the wall. If the error of the hole
positions is too big, you need to reposition.
Step 2
Insert the expansion bolt vertically into the hole, pay attention to the
insertion depth of the expanding bolt (should be deep enough).
Step 3
Align the rear panel with hole positions, fix the rear panel on the wall by
tightening the expansion bolt with the nuts.
