97
6.8 Controlling
Controlling means checking whether the weighed goods meet a target weight within a specified
tolerance range.
This function can also be used for calibrating to a specified target value with a lower or upper
tolerance limit.
Tolerance deviations from the target value can be specified in the programmed unit or in %.
The program settings for Controlling allow selecting the target value comparison with the current
reading (factory default) or the totaling memory.
After the weighed goods are placed, the display shows the actual weight and the control range
with a control light. The colors green / yellow / red, incl. the relevant range symbol visualize the
variance from the specified target value.
Control ranges: below tolerance | within tolerance (with exact target value reached) | above
tolerance
6.8.1 Function keys
The function keys F1 to F6 are available to control the functions. These are assigned in three levels;
switching between the levels is accomplished with the Function Page key .
1. Control functions level
Target
value
Contr.
Fix
Total
Cancel
Add
F 1
F 2
F 3
F 4
F 5
F 6
2. Tare functions level:
Tare
Fix
Add
Tare
Int.
Tare
Multi
Tare
Save
Fix
F 1
F 2
F 3
F 4
F 5
F 6
3. Setup functions level:
Gross
x10
Secondary
display
Prog
ram
Setup
mode
F 1
F 2
F 3
F 4
F 5
F 6