189
Display current totals
During a totaling transaction, you can display the accumulated totals by sequentially pressing the
key followed by the F4 Total key.
The totals can be deleted with the F2 Delete Total key and with the F1 Delete Seq. No. key (if
enabled in setup mode), or you can continue totaling by returning with the F6 key.
Display individual items
During a totaling transaction, you can retrieve the individual items from the totaling memory by
sequentially pressing the key and F5 Plus key. The item list begins with the latest entry.
Page through the list with the F3 (older entries) and F4 (newer entries) Arrow keys.
The last 50 entries can be retrieved.
Press the F6 Back key to close the display of the individual items and to return to the previous
screen.
Totaling outside of tolerance
Totaling quantities outside of a specified tolerance range can be prevented. If the unit count is
outside of the tolerance, the error message "Outside of Tolerance" is displayed after pressing the
Plus key.
For this purpose, "Totaling outside of tolerance" must be switched off in setup mode.
The target unit count and the permitted tolerance are specified in Percent Control mode.
More information about this under Percent Control