Sodi RS3 KZ DD2, User And Maintenance Manual

Page: 30 / 50

10/2022
30
EN
USER AND MAINTENANCE MANUAL
6.1.11 - Cleaning
Brake should be cleaned using a dry cloth and brake cleaner
only.
Do not use WD40 or other greasy products to clean the
callipers and brake discs.
► If WD40 or a similar cleaning product is
splashed on the brake disc or calliper,
braking will be less efficient or possibly
totally ineffective for a few revolutions. This
could cause a serious or fatal accident.
► Do not apply WD40 or other cleaning
products to the brake pump.
● Never spray brake cleaner on the master
cylinder and brake calliper seals.
6.2 - Brakes - Workshop maintenance
6.2.1 - Replacing calliper seals / 4 pistons calliper D18
(front)
This operation must be performed by a
SODIKART dealer.
Removing
2
3
4
1
Legend
1 Pin
2 Brake pad
3 Bleeder screw
4 Mounting screw
● Untwist the ends of the pin (1) and remove it.
● Remove the brake pads (2).
● Remove the bleed screw (3) and its cap.
● Disconnect the yoke by removing the two mounting
screws (4).
2
1
3
Legend
1 O-ring
2 Piston
3 Gasket
● Remove the two O-rings (1), the two pistons (2) and the
two seals (3) from each half-calliper.
● Clean the half calliper bodies. Do not use WD40 or other
greasy products to clean the callipers.
► Do not use any cleaning product that could
damage the seals. A brake fluid leak could
appear, causing a serious or fatal accident.