Sodi RS3 KZ DD2, User And Maintenance Manual

Page: 19 / 50

MAN_Sigma_EN_02
USER AND MAINTENANCE MANUAL
19
EN
5.2.3 - Adjustment of the caster
Description of the eccentric
Front
1
3
2
Rear
1
4
Legend
1 Eccentric
2 Screw on the fork
3 Marked slot
4 Mark
(1 = 0.5°, 2 eccentric marked 1 gives 1°)
Adjustment of the caster - High
FRONT
REAR
Eccentrics on top:
● The mark is positioned in front of the screw (towards the
front of the chassis).
Eccentrics on bottom:
● The mark is positioned on the opposite side of the screw
(towards the rear of the chassis).
Adjustment of the caster - Low
FRONT
REAR
Eccentrics on top:
● The mark is positioned on the opposite side of the screw
(towards the rear of the chassis).
Eccentrics on bottom:
● The mark is positioned in front of the screw (towards the
front of the chassis).
Standard adjustment
● 1° upper eccentrics placed in high caster position.
Increase the caster
● 2° eccentric in high caster position.
●
In extreme conditions, use 3°, 4° or more
eccentrics.
Reduce the caster
● 2° or 3° eccentric in low caster position.
● In extreme conditions, use eccentrics with higher
degrees.