socomec Masterys MAS2BC115M+D1, Installation And Operating Manual

Page: 27 / 48

MASTERYS BC
from 15 to 20 kVA
27
ENGLISH
6
MIMIC PANEL
6.1.3.1 “Alarms” menu
This menu displays all the alarms that are active at the time of access. The alarms menu is activated automati-
cally when an alarm condition occurs.
ALARMS menu
Code Mimic panel message Description
A00 GENERAL ALARM At least one alarm is present
A01 BATTERY ALARM Battery circuit failure or faulty operation.
A02 OUT OVERLOAD Power required in output over the limits.
A06 VAUX OUT OF TOL The voltage or frequency limits accepted by the bypass have been exceeded.
A07 OVER TEMPERATURE Temperature excessive or ventilation problems.
A08 MAINTEN. BY-PASS Active bypass procedure
A17 IMPROPER USE Improper conditions of use verified (load, mains, temperature).
A18 OVERLOAD OFF INV Inverter shutdown due to overload.
A20 WRONG CONFIG Error in the configuration parameters (e.g. different between several UPS units
in parallel).
A22 MAINS OUT OF TOL The voltage or frequency limits accepted by the rectifier have been exceeded
A2 RECTIFIER ALARM Rectifier fault
A25 INVERTER ALARM Inverter fault
A26 BATT CHARGER ALM Battery charger fault
A29 BY-PASS ALARM Bypass fault
A0 OVERLOAD STOP The duration of the overload has inhibited the bypass.
A8 EXTERNAL ALARM 1 Signalling from ADC input
A9 EXTERNAL ALARM 2 Signalling from ADC input
A40 EXTERNAL ALARM Signalling from ADC input
A41 EXTERNAL ALARM 4 Signalling from ADC input
A42 E-SERVICE ALARM Alarm that generates automatic sending of a signal to the support centre
(if the service has been activated)
A4 REDUNDANCY LOST The power required by the load no longer allows the preset redundancy N+x
(signalling for UPS units in parallel) to be maintained.
A44 SERVICE CHECK Notification that the periodic service check is overdue
A49 BATT. DISCHARGED The energy available in the battery has been used up.
A51 OPTIONAL BOARD ALM Fault in the optional cards in the slots.
A58 ESD ACTIVATED The remote emergency shutdown command has been activated.
A59 BATTERY CIRCUIT OPEN The battery switch is open.
A60 FAN FAILURE Fans faulty or blocked
A61 PHASE ROT FAILURE Wrong phase cycle direction