65
DIRIS Digiware - 542875G - SOCOMEC
EN
13.4. Protection counter alarms
Alarms on protection counters can be configured thanks to the VirtualMonitor technology (available with DIRIS Digiware
S-135 module and with DIRIS Digiware I-35/I-45 modules connected to iTR current sensors):
- Total operation counter
- Low-load operation counter
- On-load operation counter
- Overload operation counter
- Total Trip Counter (this feature is also available using the inputs of the DIRIS Digiware IO-10)
Refer to the VirtualMonitor paragraph (section 14 of this instruction manual) for more information on protection counters.
Acknowledgement
Protection counter alarms can be acknowledged either:
- Automatically
- Via communication (from WEBVIEW, DIRIS Digiware D display or Modbus command)
- Via a digital input (for devices with digital inputs, such as DIRIS Digiware IO-10 and I-4x modules)
Output report
Protection counter alarms can be linked to a digital output for alarm reporting purposes.
Delay
A time delay can be configured at the start and the end of the alarm.
13.5. Logical alarms
Logical alarms are activated upon the change of status of a digital input.
Acknowledgement
Logical alarms can be acknowledged either:
- Automatically
- Via communication (from WEBVIEW, DIRIS Digiware D display or Modbus command)
- Via a digital input (for devices with digital inputs, such as IO-10, I-4x etc.)
Output report
Logical alarms can be linked to a digital output for alarm reporting purposes.
Delay
A time delay can be configured at the start and the end of the alarm.
