6 |
CHAPTER 2: SETUP FOR WINDOWS CE
Chapter 2
Setup for Windows CE
This chapter shows how to install, configure, and use the In-
Hand Scan Card-Imager (ISC-I) with a Pocket PC
2000/2002/2003 based on Windows CE v3.0 or greater
This chapter shows Pocket PC 2002 screens. Other
Windows CE devices will have functionally equivalent
screens except where otherwise noted.
For instructions on using the In-Hand Scan Card-Imager
Demo, please refer to the User’s Guide for that specific application.
Installation Steps Summary
STEP 1: Register the card.
STEP 2: Uninstall old bar code scanning software.
STEP 3: Install the software.
STEP 4: Insert the ISC-I into Your Device.
STEP 5: Start SocketScan.
STEP 6: Assign a trigger button.
STEP 7: Start scanning data into a Windows program!
OPTIONAL: Select symbologies.
OPTIONAL: Configure prefix/suffixes.
OPTIONAL: Run Scan Demo to scan unknown bar codes.
OPTIONAL: Configure sounds.
OPTIONAL: Manually configure specific symbologies or extensions.
STEP 1: Register the Card
Socket highly recommends that all customers register their Socket products.
Registered users receive priority for technical support. Register the card
online at
www.socketcom.com/prodreg
STEP 2: Uninstall Old Scanning Software
Remove any bar code scanning software you may already have installed on
your mobile computer.
