CHAPTER 3: SETUP FOR WINDOWS 98/Me/2000/XP
|
15
Chapter 3
Setup for Windows
98/Me/2000/XP
This chapter explains how to install and use the In-Hand
Scan Card-Imager on a notebook computer running
Windows 98/Me/2000/XP.
*
This chapter features screen images from Windows 98SE.
Other Windows versions will have functionally
equivalent screens except where otherwise noted.
The ISC-I does not work with Windows NT at this time.
Installation Steps Summary
STEP 1: Register the card.
STEP 2: Uninstall old bar code scanning software.
STEP 3: Install the software.
STEP 4: Insert the ISC-I.
STEP 5: Complete new hardware wizard.
STEP 6: Start SocketScan.
STEP 7: Assign a trigger button.
STEP 8: Start scanning data into a Windows program!
OPTIONAL: Configure prefix/suffixes
OPTIONAL: Configure sounds.
OPTIONAL: Configure SocketScan for specific symbologies or extensions.
STEP 1: Register the Card
Socket highly recommends that all customers register their Socket products.
Registered users receive priority for technical support. Register the card
online at
www.socketcom.com/prodreg
STEP 2: Uninstall Old Scanning Software
Remove any bar code scanning software you may already have installed on
your mobile computer.
*
Windows 98 and Windows 98 SE
