CHAPTER 2: SETUP FOR WINDOWS CE | 7
STEP 3: Install the Software
Follow these steps for software installation BEFORE inserting the ISC-I.
1. Make an active connection between the mobile computer and a host PC.
Use ActiveSync and a serial/USB/Ethernet connection cable or cradle.
2. Insert
the
SocketScan Installation CD
into your CD-ROM drive.
3. Use
My Computer
or
Windows Explorer
to access your CD-ROM drive.
In the CD, click on SETUP.HTM.
4. Follow the SocketScan Setup Center to install the software for
Windows CE.
5. In
the
File Download
screen, select the option that lets you open (or run)
the file from its current location.
4. A
Security Warning
screen will appear. Click
Yes
.
5. Follow the instructions that appear on your screen until setup is done.
6. Disconnect the mobile computer from the host PC. Soft reset the
mobile computer.
7. Soft reset the device by pressing the reset button. Now you are ready to
insert the ISC-I.
IMPORTANT!
YOU MUST OPEN
THE FILE!
DO NOT SAVE!
Note: The host
PC can be a
desktop or
notebook PC.
