Lit. No. 72107, Rev. 02
17
November 15, 2018
OPERATING THE SPREADER
ADJUSTING THE SPINNER
The spreader is equipped with an adjustable spinner
to assist in more precise material application. The
spinner plate gives the operator control over whether
the material spreads to the right, left, or centered.
When looking down at the spinner, moving
the fins clockwise will adjust the spread pattern
toward the left side of the spreader.
When the fins are in the center adjustment
position, the spread pattern will be
mostly centered.
When looking down at the spinner, moving
the fins counterclockwise will adjust the spread
pattern toward the right side of the spreader.
Before operating the spreader, spread some material
in a clear area where the spread pattern can be easily
observed to see how it changes with
fi
n adjustment.
Use the instructions below as a guide to get the
desired spread pattern.