Lit. No. 72107, Rev. 02
18
November 15, 2018
OPERATING THE SPREADER
INVERTED V
The Super Maxx™ SP-9300XH hopper spreader uses
an inverted V baf
fl
e design over the auger area. This
baf
fl
e reduces the load on the auger. The inverted V
should not be removed unless servicing the unit.
The secondary salt baf
fl
e can be removed for
spreading sand/salt mix.
WARNING
Always disconnect the power source before
attempting to remove the material baf
fl
e.
AUGER DISCHARGE TROUGH
The Super Maxx SP-9300XH hopper spreader uses
an auger discharge trough to reduce material leakage.
It must not be removed unless servicing the unit.
WARNING
Always disconnect the power source before
attempting to remove the auger discharge
trough.