Snow Peak SD-180, Instruction Manual

Page: 19 / 24

Velcro tape
1.5 ｍ
(4’9”)
1.5 ｍ
(4’9”)
②
③
④
⑤ ⑥
①
Rope
About 90 °
About
45 °
Ground
Peg
Direction of peg down
About
45 °
Peg down loop
Ring of tent
Rope
tensioner
【 Peg down to the rope 】
Peg down as far as possible from
the tent. The ideal peg position is
when the rope is angled 45 ° to the
ground. Be sure to insert the pegs
at a 90 ° angle to the rope.
【 Peg down to peg-down loop 】
Peg down at an angle of about
45°to the ground.
【 Direction to pull the rope
tensioner 】
Adjust the tension of the rope by
putting your fingers on the rope
tensioner and pulling the rope
tensioner towards peg from the tent
ring.
Peg
18
9
Attach the Velcro tape on the inside of the flysheet to the pole at the locations shown in the illustra-
tion. (3 places)
10
Pass the pegs through the peg-down loops and ropes shown in the figure and peg down (fix the tent
by sticking the peg into the ground). Ideally, the pegs should be placed on the diagonal of the tent
in the order shown in the figure. Adjust the tension of the rope by pulling the rope tensioner on each
side of the rope.