Snow Peak SD-180 Instruction Manual Download Page 22

21

Water-Repellent and Waterproof Functions

●The fabric of the fly is treated with a high-quality, water-repellent finish. However, the level of water 

repellency and durability may vary slightly due to the characteristics of each material. In addition, the 

water repellency will deteriorate over time and consistent use.

When the water repellence decreases, 

use a water-repellent spray purchased from your local outdoor gear retailer and follow the product’s 

instructions accordingly.

●Materials with high waterproof capacity are used in this product. However, if the materials are in contact 

with pools of water on the ground for long periods,  the material may begin to absorb water. Also, please 

refrain from using the product in heavy rain. 

●  The  PU  coating  may  also  be  damaged  by  agricultural  chemicals,  which  can  cause  an  abnormal 

decrease in waterproof capabilities. Please note that the product cannot be covered under warranty if 

this is the cause of damage.

● The logo may peel off as a side-effect of using the water-repellent treatment.

Regarding the Effect of Ultraviolet Rays

●A UV protection treatment has been applied to the fly material. 

*The  UV  protection  treatment  does  not  completely  shield  humans  from  ultraviolet  rays  or  stop  the 

deterioration of the material’s strength.

●When the tent material is exposed to sunlight for long periods of time, color degradation or strength 

deterioration may occur. Therefore, do not leave the product assembled permanently.

●If the material deteriorates due to ultraviolet rays and is badly damaged, it may become irreparable.

Maintenance

●When using a product that has not been used for a long time, check the product and its contents 

carefully.   If you have any questions, please contact Snow Peak Customer Service.

●A  combination  of  polyester  fabric  is  used  for  this  product.  Taking  the  material  characteristics  into 

consideration, we adopted processing and color patterns that will result in less color migration. Howev-

er, depending on storage conditions, slight color migration may still occur. Do not store the product 

while it is wet to prevent this color migration.

●Do not wash this product in a washing machine. If the fly sheet or floor sheet gets dirty, wipe it off lightly 

with a wet cloth.

●Before storage, the product should be cleaned and dried sufficiently. If the product is stored when wet, 

the build-up of mold, bad odors, color migration, and material deterioration will occur. Dry the product 

sufficiently in a breezy and shaded area and clean the surface with a soft brush before storing.

●Clean and dry the surface of the poles before storing. If stored when wet, corrosion may occur, resulting 

in strength deterioration. Keep the joints clean and apply a small amount of silicone lubricant; applying 

an excessive amount of lubricant will stain the cloth. Ensure that the cords inside the poles are not 

pulled unnecessarily.

●Store the product in a well-ventilated area, away from heat and moisture.

●Using the zipper when it is covered with mud, sand or dust may cause wear or damage.

Clean  the  zipper  with  a  brush  before  use. Apply  small  amounts  of  silicone  lubricant  to  the  fastener 

regularly to allow for smooth movement. Do not apply excessive amounts of lubricant as it will leave 

stains on the cloth.

●Slight damage to the cloth can be mended with repair tape that can be purchased from your local 

outdoor gear retailer. Refer to the product instructions for the correct use of such repair tape.

●Depending on the conditions during use, the tent material may deteriorate over a wide area, losing its 

durability and becoming irreparable.

●Sap cannot be easily removed. Do not set up this product under trees that frequently drop sap. The 

fabric or coating may be permanently damaged if the sap is forcibly removed with a solvent, etc.

●To  maximize  the  longevity  of  this  product,  regularly  check  and  maintain  the  product  as  described 

above.

Summary of Contents for SD-180

























Reviews: