Snorkel SL26RTE, Manual

Page: 23 / 209

Page 2 - 14 SL26/30SL
PLATFORM EXTENSION (SL26 SPEED LEVEL ONLY)
The platform can be extended and securely locked into position. Use the following procedure to
extend the platform:
1. Enter the platform and close the gate.
The extension platform is free to move when the handles are unlocked. Personal injury may
result from accidentally extending or retracting the platform. Make certain the lock pin is
engaged when the platform is extended in the working position and when it is stowed.
Do
not attempt to extend or retract the platform unless the aerial platform is on a level surface.
!
C A U T I O N
!
2. While facing the front of the platform, unlock the LH and RH handles on the extension platform.
Using the handles, slide the extension platform out. Ensure that the LH and RH are locked se-
curely in place.
3. Try to move the rails back and forth to make sure the platform extension is locked in place.
PLATFORM RETRACTION(SL26 SPEED LEVEL ONLY)
1. Enter the platform and close the gate.
The extension platform is free to move when the handles are unlocked. Personal injury may
result from accidentally extending or retracting the platform. Make certain the lock pin is
engaged when the platform is extended in the working position and when it is stowed.
Do
not attempt to extend or retract the platform unless the aerial platform is on a level surface.
!
C A U T I O N
!
2. While facing the front of the platform, unlock the LH and RH handles on the extension platform.
Using the handles, slide the extension platform in. Ensure that the LH and RH are locked se-
curely in place.
3. Try to move the rails back and forth to make sure the platform extension is locked in place.
FOLD DOWN GUARDRAILS
This procedure is for the purpose of transportation. Guardrails must be returned to the upright posi-
tion (safe working position) before using the machine.
FOLD DOWN PROCEDURE
1. Retract extension platform by releasing securing pins and sliding extension platform into locking
position.
2.
Unhook the controller from the side guardrail and place it on the floor of the platform.
3. Starting at the front of the platform, remove nuts, bolts and washers from the top of the front
guardrail. Fold the front guardrail down onto the platform.
OPERATION