Snorkel SL26RTE, Manual

Page: 132 / 209

Page 3 - 2 SL26/30SL
INTRODUCTION
! W A R N I N G !
Be sure to read, understand and follow all information in the operation
section of this manual before attempting to operate or perform service on
any SL26/30SL work platform.
It is the responsibility of the person carrying out any maintenance
operations to ensure that any hazardous substances eg waste oil,
batteries or tyres are disposed of in accordance with local regulations.
! C A U T I O N !
This section contains instructions for the maintenance of the SL26/30SL work platform. Procedures
for operation inspection, adjustment, scheduled maintenance and repair/removal are included.
Referring to section 2 will aid in understanding the operation and function of the various components
and systems of the SL26/30SL work platform and help in diagnosing and repair of the machine.
Refer to page 3-2 for recommended maintenance intervals.
NOTE: Unless otherwise specified, torque all fittings according to the “Torque Specifications
for Fasteners” and the “Torque Specifications for Hydraulic Components” on page 3-22 and
page 3-23.
SPECIAL TOOLS
The following is a list of special tools which may be required to perform certain maintenance proce-
dures on the work platform.
•
0-600 PSI (0-45 bar) hydraulic pressure gauge
•
0-3500 PSI (0-250) hydraulic pressure gauge
•
Inclinometer
•
Quick disconnect gauge port
PREVENTATIVE MAINTENANCE
The complete inspection consists of periodic visual and operational checks together with all neces-
sary minor adjustments to assure proper performance. Daily inspection will prevent abnormal wear
and prolong the life of all systems. The inspection and maintenance schedule is to be performed at
regular intervals.
Inspection and maintenance shall ONLY be performed by personnel who are trained and familiar
with mechanical and electrical procedures.
! W A R N I N G !
Before performing maintenance, familiarize yourself with the operation of
the machine. Always chock the elevating assembly whenever it is necessary
to enter elevating assembly
The preventative maintenance table has been designed to be used primarily for machine service
and maintenance repair.
Please photocopy the preventative maintenance checklist on page 3-3 and use this table as a
checklist when inspecting the machine for service.
Detailed descriptions of standard workshop procedures, safety prin-
ciples and service operations are not included.
Please note that this manual contains warnings and cautions against
some specific service methods which could cause personal injury or
could damage a machine or could make it unsafe.
Please understand that these warnings cannot cover all conceivable
ways in which service, whether or not recommended by Snorkel,
might be carried out or of the possible hazardous consequences of
each conceivable way nor could Snorkel investigate all such ways.
Anyone using service procedures or tools whether or not recom-
mended by Snorkel, must satisfy themselves thoroughly that neither
personal safety nor machine safety will be jeorpardized
!
C A U T I O N
!
SERVICE AND REPAIR