■
Daily Maintenance
Maintenance Information
❑
Pre-operational inspection
(Set the KEY SWITCH to off before starting this inspection).
COMPONENTS
SERVICE REQUIRED
Rough terrain scissor interlock tests (see page in this section)
Perform the tests to ensure the system is functioning
Platform entrance gate
Visually inspect (installation, operation)
Wiring harness and connectors
Visually inspect (installation, condition)
Battery terminals
Visually inspect (installation)
Battery fluid level
Visually inspect (covers plates)
Hydraulic oil reservoir cap
Visually inspect (installation)
Hydraulic oil level
Check fluid level (at line on side of tank)
Hydraulic oil leaks
Visually inspect (hoses, tubes)
Tires and wheels
Visually inspect (condition)
Bolts and fasteners
Visually inspect (looseness)
Structural damage & welds
Visually inspect (weld cracks, dents)
Platform guardrails
Visually inspect (condition)
Lanyard anchor points (option)
Visually inspect (condition)
Bubble level indicator
Visually inspect (condition)
Guides, rollers and slides
Visually inspect (condition)
Non slip tread grip
Visually inspect (condition)
Wrist support
Visually inspect (condition)
Operator manual
Visually inspect (that the manual is in the holder)
Placards, decals and operators manual
Visually inspect (installation and condition)
START THE
02725
FROM THE BASE CONTROL PANEL TO CHECK THE FOLLOWING
Charging system
No faults on the display
Ground controls
Actuate and visually inspect for proper operation
Emergency lowering (from the ground)
Check operation (causes correct motion)
Flashing light
Check operation
Safety prop
Check operation
Parking brakes
Check operation
Optional items
Check operation
START THE
02725
FROM THE PLATFORM TO CHECK THE FOLLOWING
Platform controls
Actuate and visually inspect for proper operation
Emergency lowering (from the platform)
Check operation
