Home-Pro 3000 Assembly Instructions
15 of 25
Figure 8. Lift Frame Mounting Reference View
Torsion Spring Bushing
1/2" Patch Bolt
Left Side Shown
Lift Frame Side Plate
5/8" Locknuts installed
on Outside of Lift Frame
Spring Keeper on Side Plate
Torsion Spring
A-Frame Spring Stop
Section 6. Lift Frame Setup
A.)
Mount Lift Arm (1TBP40) to Upper Mounting Tabs of Lift Frame as shown in Figure 9A. Lift Arm
mounts with (1) 3/4" x 4-1/2" Clevis Pin (1TBP42) and is secured with a 2" Cotter Pin.
B.)
Locate Lift Cylinder (1TBP44A) and mount to front of Lift Arm with 1" Piston Spacers (1TBP109).
The 1" x 4-1/2" Clevis Pin (1TBP108) will pass through the Piston Spacers and Lift Cylinder and will be
secured with a 2" Cotter Pin.
As shown in Figure 9A.
The Hose Port on the Lift Cylinder must face towards the Driver’s Side.
C.)
With top of Lift Cylinder secured, raise the Lift Arm and swing the Lift Cylinder bottom between
Lower Mounting Tabs on the Lift Frame and secure with a 3/4" x 2-3/4" Clevis Pin (1TBP43) and a
2" Cotter Pin to secure the Clevis Pin.
Figure 9B.
D.)
The Hydraulic Hose should now be connected to the 45º Elbow. Use (2) 9/16" Wrenches when tightening
Lift Hose to avoid twisting the Hose.
E.)
Mount Lights to Lift Frame using supplied hardware (1TBP161) and Harness Plug Storage Holder
(1TBP135).
See Figure 10.
NOTE
