IQH3A IQ 3U Modular Enclosure
www.snellgroup.com
Operation
Issue 2 Rev 2
Page 57
©
2014 Snell Limited
4.8 Gateway Control
This
Gateway Control
screen provides information about control clients connected to the
gateway unit itself (not to modules inside the enclosure). Note if SNMP is enabled, one of the
sessions is looped back to itself.
4.8.1 Control
•
Name:
This shows the RollCall controller client name / per session. Note if SNMP is
enabled, one of the session names corresponds to the name of the gateway unit.
•
Address:
Remote address of Controller client.
•
Packet Count:
The number of control packets on session to remote client.
•
Connected Total:
The total number of control packets on all sessions. This includes
previously closed client session counts. This value is cleared by clicking the
Clear
Packet Count
button.
•
Show Session:
Drag the slider to browse different sessions. All sessions are indexed
from 1, with no gaps in between. Click the Preset (
P
) button to return to the default
value.
•
Disconnect Session:
When this button is clicked, the current displayed session is
disconnected.
4.8.2 Blind Control
Displays information on the last blind controller to the gateway.
•
Allow Blind Control:
If this box is enabled, blind control packets are accepted at the
gateway.
