SHDFTRM
OPERATION
SHDFTRM
Version 1 Issue 1
180203
4
Scope of this Operation Manual
This is the operation manual for the System HD Fibre Optic Transceiver module. It covers the modules ordered
under the following codes :
SHDFTRM0WQ4 – Standard Transceiver with 4 optical outputs from the Transmitter
SHDFTRM0WQ2 – Standard Transceiver with 2 optical outputs from the Transmitter
SHDFTRM0WQ0 – Standard Transceiver with a single optical output from the Transmitter
SHDFTRM0WQC – WDM Transceiver with a single optical interface (Use with SHDFTRM6WQD)
SHDFTRM6WQD – WDM Transceiver with a single optical interface (Use with SHDFTRM0WQC)
SHDFTRM0WQ4
: Rear Panel View
SHDFTRM0WQ2
and
SHDFTRM0WQ0
: Rear Panel View
SHDFTRM0WQC
and
SHDFTRM6WQD
: Rear Panel View
Module Description
The Optical SDI Transceiver can convert an
electrical SDI bitstream to an optical SDI bitstream
while simultaneously converting a separate optical
SDI bitstream into an electrical SDI bitstream. With
the ‘standard’ interface card fitted (rear view shown
above), the optical input path provides four
identical electrical SDI outputs and the electrical
SDI input channel can provide up to four identical
optical SDI outputs.
Each channel can convert either a single high-
definition serial digital (HD-SDI / SMPTE292M) or a
single standard-definition serial digital (SD-SDI /
SMPTE259M) bitstream.
The electrical serial digital (SDI) bitstream
interfaces are via 75 BNC connectors on the
backpanel of the rear interface card. The optical
outputs are via the SMPTE292M recommended
SC/PC singlemode fibre optic connectors. The
SC/PC connector is robust and easy to use, a
simple snap-fit enables a reliable connection to be
made in a matter of seconds.
