SHDFTRM
OPERATION
SHDFTRM
Version 1 Issue 1
180203
12
Standard Transmitter Outputs
Optical SDI Output – Quad Output Option
Used On :
SHDFTRM0WQ4
The serial digital optical outputs are provided via a
pair of dual SC/PC single mode panel mounted
uniters. The overall connection is labelled as
H1
on
the rear panel as shown opposite. The four optical
outputs are denoted as 1, 2, 3, and 4 and arranged
as shown in the diagram. All four outputs produce
almost identical levels of optical power and
identical digital bitstreams. These are single optical
wavelength outputs.
Do not remove the covers from the uniters until a
fibre connection is ready to be inserted.
Optical SDI Output – Dual Output Option
Used On :
SHDFTRM0WQ2
The serial digital optical outputs are provided via a
dual PC/SC single mode panel mounted uniter set.
The overall connection is labelled as
H1
on the rear
panel as shown opposite. The two optical outputs
are denoted as 1, and 2. The rear label mentions
connections 3, and 4 as well, but these are not
present in this case. The connectors are arranged
as shown in the diagram. Both outputs produce
almost identical levels of optical power and
identical digital bitstreams. These are single optical
wavelength outputs.
Do not remove the covers from the uniters until a
fibre connection is ready to be inserted
Optical SDI Output – Single Output Option
Used On :
SHDFTRM0WQ0
The serial digital optical output is provided from
one side of a dual SC/PC single mode panel
mounted uniter. The overall connection is labelled
as
H1
on the rear panel as shown opposite. The
optical output is denoted as connection 1. The rear
label mentions 2, 3, and 4 as well but these are not
present in this case. The connector is arranged as
shown in the diagram. This is a single optical
wavelength output.
Do not remove the cover from the uniter until a
fibre connection is ready to be inserted
