![background image](http://html1.mh-extra.com/html/snell-and-wilcox/shdftrm0wq0/shdftrm0wq0_operation-manuals_1309067006.webp)
SHDFTRM
OPERATION
SHDFTRM
Version 1 Issue 1
180203
6
Features
Optical transmission and recovery capability on
single board
SMPTE 292M 1.485Gbit/s HD-SDI data rates
supported
SMPTE 259M 270Mbit/s SD-SDI data rate
supported
Async mode of operation. For use with D2,
DVB-ASI, MPEG streams, AES-EBU, etc.
SMPTE 292M recommended SC/PC
singlemode user interface connectors
Four coaxial outputs from single optical input
Four optical outputs from single coaxial input
Transmission distances up to 20km
Bit error rate (BER) <10-12
Two optical output wavelengths
(1300/1550nm) available for laser transmitter
Receiver wavelength input range 1200-
1600nm
WDM bi-directional capability
Optical to optical reclocking capability
Optical data transport offering:
EMI immunity
No earth loops
Small, lightweight, flexible cabling
Easy to locate and repair cable breaks
Alarm functions for poor quality input signals
and device malfunction
Stand-alone or RollCall operation
Incoming signal analysis available as an
option, it includes:
CRC status
Line standard
Frame rate
Error rate
Note:
RollCall
TM
enabled for remote system control &
monitoring.
In Async mode some SDI outputs may not be
compatible with certain equipment due to the use
of complimentary outputs. E.g. Some ASI streams
aren’t inversion compatible.