IQBRK00/01
B12
IQBRK00OPS 05/04/07
www.snellwilcox.com
Version 1 Issue 6
B12.33
Setup
Information Window
The type if information that appears in the
Information Window may be chosen with this item.
Input Status
EDH & ANC Status
Audio Input Status
Input Status
In1: or In2:
This shows the status of the input, the
line standard and which input has
been selected.
Out:
This shows the status of the output.
EDH & ANC Status
E-Time:
This shows the time since EDH was
reset in Hours:Minutes:Seconds.
EDH:
This shows the number of EDH errors
that have occurred since the last EDH
reset followed by the time in seconds
since the last EDH error.
ANC:
This shows the number of ANC errors
that have occurred since the last ANC
reset followed by the time in seconds
since the last ANC error.
Selecting this function will reset EDH and ANC
error count and the timer shown in the information
window, to zero. If inputs are switched over an
automatic reset occurs.
Audio Input Status
AES In:
This shows the status of the
selected
audio input
In1(2)
This shows the audio pairs present on
the selected input as 1, 2, 3, 4, etc.
NPCM
This shows the non-PCM audio pairs
present on the selected input as 1, 2,
3, 4, etc. This example shows that
pair
4
is
non-PCM.
Note that the Dolby header in the data
stream is used to detect if the audio is
non-PCM.
Information
Window
Error Seconds Reset