![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqbrk00-01/iqbrk00-01_manual_1309049017.webp)
IQBRK00/01
B12
IQBRK00OPS 05/04/07
www.snellwilcox.com
Version 1 Issue 6
B12.17
Audio Bus A and B/Audio Bus C and D
This function allows the inputs for the four audio
buses of the router to be selected.
For each bus any source may be selected from the
list for the left and right channels.
L and R
These scrollbars allow the gain to be adjusted over
a range of ±18 dB in 0.1dB steps. Preset is to
0 dB.
Invert
When checked the signal polarity will be inverted.
Mute
When checked the signal will be muted.
Stereo
When checked the left and right channels will be
configured as a stereo pair and any adjustments
made to one channel will automatically be applied
to both channels.
Audio Embed
This function sets up the embedder sources and
destinations. Higher number embedders have
priority, so if the same destination pair is selected
on two embedders, the highest embedder will be
the one that is active.
Embedder 1, 2, 3, and 4
The source of the signal for the embedder may be
selected from the list.
Destination 1, 2, 3, and 4
The destination for the embedded signal may be
selected from the list.
Disable 1, 2, 3 and 4
When checked the embedding will be turned off.
For details of the Audio Embedding Packet
Distribution please refer to Appendix 2 on page 79.