![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqbrk00-01/iqbrk00-01_manual_1309049042.webp)
IQBRK00/01
B12
IQBRK00OPS 05/04/07
www.snellwilcox.com
Version 1 Issue 6
B12.42
Audio
This menu allows the audio processing functions
to be set up.
Audio
De-embed...
Analog Out....
Embed...
Buses...
Monitor...
AES Output…
ProcAmp...
Mix...
Delay...
◀
◀
◀
◀
De-embed
This allows the audio signal to be selected for
processing.
De-embed
Input 1 SDI
Input 2 SDI
Follow Video
◀
Input 1 SDI, Input 2 SDI
This allows audio derived from either Input 1 SDI
or Input 2 SDI to be selected for processing.
Non-PCM groups can be transparently passed but
if a non-PCM group is selected for mixing or
routing it will be automatically muted.
If a Dolby header is detected in the data stream it
will be processed as a non-PCM signal.
◀
Follow Video
When selected the audio will be derived from the
video input signal that has been selected for
processing.
◀
◀
◀
◀
AES Output
This allows the AES signal source for the AES
output to be selected.
AES Output
AES 1 Source
AES 2 Source
◀
AES 1 and 2 Source
This allows the signal from the AES source to be
selected. Silence and audio test tones may also be
selected.
Chroma_B/W
AES 1, 2 Source
BUS A
BUS B
BUS C
BUS D
AES 1 Direct
AES 2 Direct
DeEmbed 1
DeEmbed 2
DeEmbed 3
DeEmbed 4
DeEmbed 5
DeEmbed 6
DeEmbed 7
DeEmbed 8
Test Tone
Silence
◀
◀
◀
◀
Analog Output
This allows the analog signal source for the analog
output to be selected.
Analog Out
Analog 1 Source
Analog 2 Source
◀
Analog 1 and 2 Source
This allows the signal from the analog source to be
selected. Silence and audio test tones may also be
selected.
Chroma_B/W
Analog 1, 2 Source
BUS A
BUS B
BUS C
BUS D
Test Tone
Silence