IQSDA41/42
Technical Specification
Issue 1 Rev 1
Page 13
© 2017 SAM
Roll Track Sources
Unused, Input Present (1 & 2, Fiber 1 & 2), Input Loss (1 & 2,
Fiber 1 & 2), Output Rate/Std (1 & 2), Out 1 Selects (In 1 & 2 & Rx
1 & Rx 2), Fiber Rx Power OK (1 & 2), Fiber Rx Power Fail (1 & 2),
Fiber Tx Bias OK (1 & 2), Fiber Tx Bias High (1 & 2), Fiber Tx Bias
Low (1 & 2) (
Note
: fiber connections are not supported in this
release).
Factory Default
Resets all module settings to factory specified default values and
clears memories
Default Settings
Resets all module settings to factory specified default values but
does not clear memories
Restart
Software restart of the module
Module Information
Reports the following module information: Software Version, Serial
Number, Build Number, KOS Version, Firmware Version, PCB
Version
Specifications
Electrical
3 Gbit/s SDI, SMPTE 424M
1.5 Gbit/s HD-SDI, SMPTE 292M
270 Mbit/s SDI, SMPTE 259M-C / DVB-ASI
Connector/Format
HD-BNC 75 Ohm
Return Loss
>-15 dB (270 Mbit/s, 1.5 Gbit/s)
>-10 dB (3 Gbit/s)
Output Jitter
SD-SDI 0.2 UI (10 Hz) / 0.2 UI (1 kHz)
3G/HD-SDI 1.0 UI (10 Hz) / 0.2 UI (100 kHz)
Power Consumption
Module Power
Consumption
5PR IQSDA41
8PR IQSDA42
