IQSDA41/42
Technical Specification
Issue 1 Rev 1
Page 12
© 2017 SAM
2
Technical Specification
Inputs and Outputs
Signal Inputs
SDI Inputs
1 or 2 (configurable) x 12G/3G/HD/SD-SD (IQSDA41)
1, 2 or 4 (configurable) x 12G/3G/HD/SD-SD (IQSDA42)
Connector/Format
HD-BNC/75 Ohm panel jack on standard SAM connector panel
Input Cable Length
Up to 60 m Belden 1694A @ 12 Gbit/s
Up to 80 m Belden 1694A @ 3 Gbit/s
Up to 180 m Belden 1694A @ 1.5 Gbit/s
350+ m Belden 1694A @ 270 Mbit/s
Note
: When using mixed HD and SD inputs, it is recommended
that cable lengths do not exceed the HD specification of 180 m.
Signal Outputs
SDI Outputs
Up to 19, group selectable
Connector / Format
HD-BNC/75 Ohm panel jack on standard SAM connector panel
Conforms to video
standards
SMPTE 297-2006
SMPTE 424M (HD level A/B)
SMPTE 292M (HD)
SMPTE 259M-C (SD)
Control Interface
Electrical
TTL compatible, active low driven
Connector/Format
HD-BNC/75 Ohm panel jack on standard SAM connector panel
Controls
Indicators:
Power OK
(Green)
CPU OK
(Green
flashing)
Input 1
OK (Green), Bypass (Orange), Loss (Red)
Input 2
OK (Green), Bypass (Orange), Loss (Red)
SFP A
OK (Green), Bypass (Orange), Loss (Red)
SFP B
OK (Green), Bypass (Orange), Loss (Red)
Other Controls
User Memories
Name, save, and recall 16 user memories
Memory Naming
User configurable naming of memories 1–16
Information Window
Unit Status, SFP Status
Logging
Input 1(2) Type
Input 1 (2) Data Rate
Input 1 (2) Present
Input 1 (2) Error
Input 1 (2) Loss
Optical Logging
Tx Laser Bias High Warning
Tx Power Low Warning
Tx Power High Warning
Laser Wavelength
Input 1 (2) Rx Power High Warning
Input 1 (2) Rx Power Low Warning
Input 1 (2) Rx Power Measurement
RollTrack Index
Up to 16 RollTrack destinations
RollTrack Controls
On/Off, Index, Source, Address, Command, Status, Sending
