IQEDGE
RollCall Control Panel
Issue 1 Rev 1
Page 39
© 2017 SAM
5.18 Logging - SDI Info
Information on various parameters can be made available to a logging device connected to
the RollCall network. Each logging page comprises three columns:
•
Log Enable
- Select the check boxes that correspond to the parameters for which log
information should be collected.
•
Log Field
- Displays the name of the logging field.
•
Log Value
- Displays the current log value.
The information below describes the various parameters available for logging.
Figure 23 Logging - SDI Info Page
Log Field
Description
INPUT_N_CHANGE_TIME=
Displays time that the SDI input changed.
INPUT_N_SDI_CHANGE_CNT= Displays number of times that the SDI input has changed.
