IQEDGE
RollCall Control Panel
Issue 1 Rev 1
Page 20
© 2017 SAM
Domain
R uses domains to partition a network. Only nodes
on the same domain can communicate with one another. A
domain is uniquely identified with a number and a friendly
name/alias.
Set an ID as required, then press
Take
to confirm the
change.
Interface Configuration
Displays the IP address for each of the Ethernet interfaces.
Card Firmware/Software
Version
Each software version contains multiple firmware images;
different images are suitable for different combinations of
spigot (Input/Output) and codec type.
Select the required software from the
Software Version
pane, then select the required firmware from the list
displayed on the
Firmware
pane.
The module must be restarted in order for changes made
here to take effect.
Option
Operation
