13
SECTION 2 – OPERATING INSTRUCTIONS
2.1.11. Check Seat Belts. Mounting hardware must
be tight. Buckle must latch securely. Webbing must
not display signs of deterioration, wear, or damage.
2.1.12. Check Operator Protective Structure (OPS).
DO NOT operate a machine that has had the OPS
removed, damaged, or modified in any way. All OPS
mounting hardware must be tight.
2.1.13. Check Cargo Bed. Cargo bed must be
lowered and securely latched.
2.1.14. Check Safety Interlocks for proper function.
DO NOT operate machine until all safety interlocks are
repaired and functioning properly.
1. Transmission must be in Neutral and Brake fully
depressed for engine to crank and start.
2. Engine must die if operator leaves seat without
first setting parking brake.
2.1.15. Check Parking Brake. Refer to Section –
“ADJUSTMENT AND REPAIRS, Service Brake and
Park Brake Adjustment”. DO NOT operate machine
until brakes have been adjusted and are functioning
properly.
2.2 CONTROLS – FUNCTION AND OPERATION
2.2.1. Service Brake. Depress Brake Pedal to slow
or stop machine. Apply a steady firm force to the pedal.
Avoid sudden stops. Always release Accelerator Pedal
before applying brake. Allow extra stopping distance
when traveling down slopes, carrying loads or towing.
Apply brake when traveling down slopes to maintain
safe speed. To avoid skidding and loss of control do
not operate machine on loose or slippery surfaces or
where traction is doubtful.
2.2.2. Park Brake. To engage or set the park brake:
1) Move the park brake lever towards the rear of the
slot and latch in the “locked” position. See Figure 2.3.
2) Depress Brake Pedal firmly. There will be a clicking
sound as the pedal is depressed indicating that the
brake has engaged the lock mechanism.
To disengage or release the park brake:
1) Unlatch the park brake lever and move to the
“Unlocked” position.
2) Depress pedal firmly and release. See Figure 2.3.
FIGURE 2.3
WARNING
DO NOT park machine on slopes. DO NOT leave
machine with engine running. Stop machine. Stop
engine. Set park brake. Shift transmission to
neutral and remove key before leaving the machine
for any reason.
PARK BRAKE
LEVER
UNLOCKED
POSITION
LOCKED
POSITION
DIFFERENTIAL
LOCK LEVER
UNLOCKED
POSITION
LOCKED
POSITION
