Not
for
Reproduction
EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
English (original instructions)
place under the rear discharge door so
that the hooks on the grass catcher are
seated on the door rod.
■
Release the rear discharge door. When
installed correctly, the hooks on the
grass catcher will extend through the
openings on the rear discharge door.
INSTALLING THE MULCHING PLUG
See figure 5.
■
Lift and hold up the rear discharge door.
■
Grasp the mulching plug by its handle
and insert it at a slight angle, as shown.
■
Push the mulching plug securely into
place.
■
Lower the rear discharge door.
INSTALLING SIDE DISCHARGE
DEFLECTOR
See figure 6.
NOTE:
When using the side discharge
deflector, do not install the grassbox. The
mulching plug should remain installed.
■
Lift the side discharge door.
■
Align the hooks on the deflector with the
hinge rod on the underside of the door.
■
Lower the deflector until the hooks are
secured on the mulch door hinge rod.
■
Release the deflector and side discharge
door.
SETTING BLADE HEIGHT
See figure 7.
When shipped, the wheels on the mower
are set to a low-cutting position. Before
using the mower for the first time, adjust
the cutting position to the height best suited
for your lawn. The average lawn should be
between 38 mm and 51 mm during cool
months and between 51 mm and 70 mm
during hot months.
To adjust the blade height
■
To raise the blade height, grasp the
height adjustment lever and move it
toward the back of the mower.
■
To lower the blade height, grasp the
height adjustment lever and move it
toward the front of the mower.
WARNING
Do not insert switch key until assembly
is complete and you are ready to
mow. Failure to comply could result in
accidental starting and possible serious
personal injury.
WARNING
To prevent accidental starting that could
cause serious personal injury, always
remove the battery pack from the product
when assembling parts.
WARNING
Never operate the mower without the
proper safety devices in place and
working. Never operate the mower with
damaged safety devices. Operation of this
product with damaged or missing parts
could result in serious personal injury.
UNFOLDING AND ADJUSTING LOWER
HANDLE
See figure 2.
■
Pull and rotate the handle knobs 90° on
both sides to loosen the lower handles
on both sides.
■
Move the lower handles to the operating
position. You may raise or lower the
handle to a position comfortable for you.
There are 3 positions for you to choose.
Release the handle knobs to lock the
lower handle into position.
NOTE:
Ensure both sides are set at the
same position for proper assembly.
INSTALLING THE UPPER HANDLE
See figure 3.
■
Align the mounting holes on the upper
handle and the lower handle. Insert
the carriage bolts and use the knobs to
tighten them. Repeat the operation on
the other side.
INSTALLING THE GRASSBOX
See figure 4.
■
Lift the rear discharge door.
■
Lift the grass catcher by its handle and
7
Summary of Contents for 1696888
